Look at the PRINT_START macro in the printer.cfg for the standard process.

This is in addition to heating the nozzle and bed and doing other tasks. In testing, a 350^3 V2 grew 0.2mm in height after heating up for an hour.Įvery printer is going to have a start sequence that typically involves homing and/or leveling to prepare the printer. This time may vary depending on many factors including the size of the printer and bed heater. The final option is to just write the G-code. A preheat of at least 10 minutes is highly recommended in order to bring all components to thermal expansion equilibrium. One method would be to use a slicing program such as Slic3r, Skeinforge or Cura. This can be part of a scripted process or separate. These blocks can then be placed wherever you do not want supports. The tool, sometimes known as the support eraser, generates small transparent blocks when you click the cursor after activating the tool. There is also a Voron Design profile available for PrusaSlicer / Superslicer.įor maximum quality and accuracy, preheating the printer is recommended. In this case, Curas support blocker is a super handy tool that you can use to prevent the supports from printing in certain areas. The V1 is similar enough to V2 that the profile can be re-used. Slicer Profile Creationīoth Cura and SuperSlicer (in current versions) have built-in profiles for V2 printers which can be setup using each software’s normal processes. If examination of the output gcode shows an M109 and/or M190 before the PRINT_START macro, consider using a different or newer slicer that recognizes that macro as a valid start macro. PrusaSlicer) do not recognize the Klipper PRINT_START macro as a valid start macro and add an additional bed heat and nozzle heat to the start gcode. Other slicers that can be configured to support Voron printers but do not have built-in support: There are two slicers that come with built-in profiles for most Voron printers: While using different slicers for different kinds of prints can be beneficial avoid blindly hopping between slicers and slicer profiles just because someone posted a nice print sliced with a different slicer. Try to learn more about your favorite slicer and tweak the settings to meet your needs. Proper understanding of slicer settings will have a tremendous impact on print results.

The Voron community maintains a set of slicer profiles that you can use as a known good starting point for further tuning. All modern mainstream slicers are able to produce high-quality prints when properly configured for your printer.

Cura slicer settings not showing up